This 3-axle 50m³ oil tank semi-trailer features a Q235A carbon steel tank body with a thickness of 6mm and internal anti-corrosion treatment. The tank is divided into 5 independent compartments, each with a capacity of 10m³, suitable for transporting different types of oil products. It is equipped with three FUWA 13-ton axles, mechanical suspension, and a WABCO braking system. Anti-surge baffles are installed inside the tank, along with safety devices such as a breathing valve, electrostatic grounding, and emergency shut-off valves, balancing transport efficiency with hazardous chemical safety requirements.
Working Capcity:
50000 litersDimension ( mm ) :
11700×2550×3280Axle Type:
FUWA, 13-ton, 3 pcsLand Gear:
FUWA, 28 tonKingpin:
3.5'Suspension:
Leaf springTyres:
12R22.5, 13 pcsRemark:
5 compartments※ Ⅰ.Product Introduction:
The 3-axle oil tank semi-trailer is a large-scale hazardous chemical transport vehicle specifically designed for the transportation of liquid fuels. With a total tank volume of 50m³ divided into 5 independent compartments, it is suitable for carrying different types of oil products. It is primarily used for transferring gasoline, diesel, and other light fuel oils from refineries and oil depots to gas stations or end users, and can also transport other chemical liquids. The tank body is made of 6mm thick Q235A carbon steel with anti-corrosion treatment, and multiple anti-surge baffles are installed inside. The running gear includes three FUWA 13-ton axles, and the braking system uses WABCO valves. A full set of safety devices, including a breathing valve, emergency shut-off valves, and electrostatic grounding, ensures reliable and stable transport.
CEEC factory is premium supplier of tanker semi-trailers,
guarantee all fuel tanker semi-trailers Brand-New and High-Quality.
※ Ⅱ. Product Specifications:
|
No |
ITEM |
Unit |
Quantity |
MODEL |
|
Chassis |
Axle |
piece |
3 |
13T FUWA, 220mm width braking pad |
|
Tire |
piece |
13 |
12R22.5, with a spare tire |
|
|
Tire carrier |
set |
1 |
Factory standard |
|
|
Rim |
piece |
13 |
9.0-22.5 |
|
|
Suspension |
Set |
3 |
Mechanic suspension |
|
|
Leaf-sping |
Set |
6 |
90width*10piece*13thiness |
|
|
Kingpin |
piece |
1 |
3.5''bolted type.JOST |
|
|
Landing gear |
set |
1 |
FUWA 28T, two sides operation |
|
|
Toolbox |
piece |
1 |
Stainless steel |
|
|
Braking system |
Emergency relay valve |
1 |
WABCO |
|
|
Double braking chamber |
4 |
T30/30 spring brake chamber |
||
|
Single braking chamber |
2 |
T30,brake chamber on rear axle |
||
|
Tie-in |
1 |
Haldex |
||
|
Electrical system |
set |
1 |
24 volt electrical system.7 pin electrical connector.parking .stop,reverse,number plate and indicator lights.rear lights conform to European standard,rear front and side reflectors |
|
|
Main Specification of Trailer |
||||
|
Body |
Specification |
numerical value |
||
|
Volume(L) |
50000 |
|||
|
Body/conver thinkness(mm) |
6mm/6mm |
|||
|
Compartments |
5 compartments |
|||
|
Manwhole |
5 piece |
|||
|
Unload valve |
5 piece 3 inch Al. ball valve |
|||
|
Oil hose box |
2 units/circular single hole tube/steel |
|||
|
Oil hose |
2units/black rubber 6m length |
|||
|
Anti-static electricity system |
pulling, wire carrier, sheet copper (7 sheet-standard layout) |
|||
|
Accessories |
Sea suction valve |
5pcs Aluminum, pneumatic |
||
|
Label |
according to oil type |
|||
|
Side guard |
cross bar structure |
|||
|
Wheel guard |
factory standard |
|||


※ Ⅲ. Product Features:
▲ Tank Volume: Total volume of 50 cubic meters, divided into 5 compartments with a single compartment capacity of 10 cubic meters, facilitating the transport of different types or densities of liquids.
▲ Axles: Equipped with 3 FUWA 13-ton axles, providing good driving stability and load-bearing capacity.
▲ Tank Material: Made of Q235 carbon steel with a thickness of 6mm and internal anti-corrosion treatment.
▲ Internal Structure: Equipped with anti-surge baffles inside the tank to reduce the impact of liquid sloshing on vehicle stability.
▲ Safety Devices: Fitted with breathing valves, vapor recovery system, electrostatic grounding cable, emergency shut-off valve, overfill prevention device, etc., meeting the safety regulations for hazardous chemical transportation.

» Ⅳ. Product Details:
※ Ⅴ. Product Drawing:

※ Ⅵ. Batch Delivery of Fuel Tanker Trailers:
![]() |
![]() |
| Aluminum alloy fuel tanke trailers for export | Fuel tanker semi-trailers ready for shipment |
Products --100% China tipper trailer factory!
Shipping --100% fast, Convenience, Efficient!
1. Customized 2 axles, 3 axles, 4 axles fuel tanker semi-trailers
2. FUWA/BPM alxes and air suspension system for option
3.Factory bottom price, strict quality control
4. Fast delivery, common models can be supplied within 15 days.