Beiben 20m³ Rear Load Garbage Truck is a large-capacity environmental sanitation vehicle built on the Beiben 2638 heavy-duty 6×4 chassis. It is powered by a 380-horsepower Weichai engine and paired with a Fast 12-speed transmission. Equipped with a 20m³ compactor body and a Siemens PLC intelligent control system, it achieves a compaction ratio of 1:3.0. Featuring dual-direction compression and CAN-bus electro-hydraulic integrated technology, combined with a double-seal anti-drip design, this truck offers high loading efficiency, low noise, environmental friendliness, and intelligent operability. It is ideal for municipal solid waste collection and transfer operations.
Working Capcity:
20CBMCabin Type:
Beiben NG80B long cabinDimension ( mm ) :
9600×2550×3400Drive System:
6×4Wheelbase (mm):
4450+1450Engine Power:
380HP/WP10.380E32Gear Box:
12JS200TTyres:
12.00R20, 10+1 pcsRemark:
4×4, 6×4, 6×6, RHD drive is optionalThe Beiben 20m³ Garbage Compactor Truck is a large-capacity sanitation vehicle built on the Beiben 2638 heavy-duty 6×4 chassis. It is equipped with a Weichai WP10.380E32 engine (380 hp, torque 1600 N·m) and a Fast 12-speed transmission, delivering strong power and high transmission efficiency. The upper body features a 20m³ high-strength special-steel compactor body with a compaction ratio of 1:3.0. Combined with dual-direction compression technology and a Siemens PLC intelligent control system, it automatically performs waste loading, crushing, compacting, and discharging, with a single loading cycle of less than 10 seconds, significantly improving per-load efficiency.
This truck excels in environmental protection and intelligence: the joint surface of the tailgate uses double-layer rubber seals and a wastewater diversion device, effectively preventing secondary pollution; the CAN-bus electro-hydraulic integrated control automatically adjusts engine power output, reducing fuel consumption and system heating while maintaining low-noise operation. The Beiben heavy-duty rear end loader is suitable for centralized municipal waste collection, transfer station transport, and large-community cleaning operations. Its automatic + manual dual-mode operation and lifting mechanisms compatible with standard 240L/660L/1100L garbage bins allow flexible adaptation to various working scenarios.
CEEC factory is authorized supplier on Beiben garbage compactor trucks,
guarantee all Beiben rear loader garbage trucks Brand-New and High-Quality.
▲ Ⅰ.Product Defination and Introduction:
Manufacturer: CEEC TRUCKS
▲ Ⅱ. Product Specifications:
|
Beiben 20CBM garbage compactor truck specifications |
|
|
Product Name |
Compactor Garbage Truck |
|
Model |
CEEC5260ZYS |
|
Chassis brand |
Beiben (North Benz) |
|
Driving Type |
6*4 |
|
Gross Weight |
26000kg |
|
Curb Weight |
15500kg |
|
Dimension |
9600×2550×3400mm |
|
Wheelbase |
4450+1350mm |
|
Front Axle |
7.5 T, non-driving steering axle, drum brake |
|
Middle & Rear axle |
13T, Double-shoe pneumatic brake, single reduction driving axle, differential lock, speed ratio is 5.269 |
|
Steering gear |
8098 Circulating ball steering gear, hydraulic booster |
|
Front and rear suspension |
Leaf spring, 10/13 pieces |
|
Brake |
Service brake: Double circulation air brake system equipped |
|
Parking brake: Energy storage spring brake |
|
|
Assisted brake: Engine exhaust brake |
|
|
Tire |
12.00R20, 10+1 pcs |
|
Max Speed |
89(Km/h) |
|
Engine parameters: |
|
|
Model |
WP10.380E32 |
|
Horse Power |
380HP (280kW) |
|
Displacement |
9.726L |
|
Emission Standard |
Euro 3 |
|
Type |
4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling |
|
Rated speed |
2200 rpm |
|
Max torque |
1600 N.m |
|
Max. torque speed |
1500-1800rpm |
|
Fuel tank |
400L |
|
Gear Box |
|
|
Model |
FAST 12JS200T |
|
Gears |
12-speed forward and 2 reverse |
|
Superstructure Parameter |
|
|
Compactor Volume |
20m3 |
|
Material |
T420 (Special Steel) |
|
Compression Ratio |
1:3.0 |
|
Volume of the tailgate |
2 m³ |
|
Loading cycle time |
≤25 s |
|
Tailgate lifting time |
≤15 s |
|
Unloading cycle time |
≤110 s |
|
Bin lifter cycle time |
≤10 s |
|
Control method |
Automatic+Manual |
|
Maximum pressure of hydraulic system |
20 MPa |
|
Control System |
Siemens PLC |
|
Bin lifter type |
Suitable for 2 units 240L garbage bin |
▲ Ⅲ. Product Details
▲ Ⅳ. Product Drawing:
▲Ⅴ. Beiben Garbage Compactor Performance Advantages:
Environmental Friendliness:
1. Optimized operating speeds and high-quality components control overall working noise, reducing noise pollution.
2. Double-layer rubber seals at the joint between the packing mechanism and the waste container, along with a wastewater diversion device, channel liquids into the packing mechanism's wastewater tank, effectively eliminating dripping and reducing environmental contamination.
High Efficiency:
1. Dual-direction compression technology delivers a high compaction ratio and strong loading capacity.
2. Large hopper volume of the packing mechanism ensures high loading and compaction efficiency, with a loading cycle of less than 10 seconds.
Intelligent Control:
1. The control system adopts advanced foreign technology, utilizing the most sophisticated "CAN-bus + dedicated controller" mode, offering high automation, excellent reliability, low failure rate, and long service life.
2. Engine power output is fully automatically controlled via the electrical system, ensuring the engine automatically adjusts its speed during all operating states, avoiding power loss and system overheating, resulting in low fuel consumption and good economic performance.
▲Ⅵ. Beiben Waste Compactor Working Process
Products--100% china beiben factory trucks!
Shipping --100% fast, Convenience, Efficient!
1.Beiben 4x2, 6x4, 8x4 drive garbage compactor truck, all upon on your need !
2. Factory bottom price, save your china vist cost
3.12 months after sale service guarantee, quality assurance.
4. Customized compactor volume, from 10~30CBM.
North benz 4*2 truck chassis, weichai diesel engine 270 hp, ZF 9 shift transmission, benz technology front axle and rear axle, 4800 wheelbase, 11.00-20 tyre. 15 years experience on beiben garbage compactor trucks producting and designing.
The Beiben 20CBM garbage compactor truck is built on a Beiben 6×4 chassis and powered by a Weichai 380hp engine. The compactor body has a volume of 20 m³ and a compression ratio of up to 1:3. It is equipped with a CAN bus control system and a hydraulic bin lifting mechanism, compatible with standard garbage bins ranging from 240L to 1100L. The vehicle features excellent sealing and a built-in sewage collection device to prevent secondary pollution, making it suitable for municipal sanitation and community waste collection.
The Beiben 12CBM rear loader garbage truck is based on Beiben 1929 special chassis, equipped with a 290HP Weichai engine and FAST 9-speed transmission. It has a body volume of 12 cubic meters and a compression ratio of 3:1, which significantly reduces waste volume. The hydraulic system is durable with low failure rates, and together with CAN-bus control, it allows one operator to complete loading, compressing, and unloading. It is suitable for urban household waste collection and transportation, effectively reducing transport frequency and operating costs.
Beiben 20 cubic garbage compactor truck is a professional sanitation equipment specifically designed for efficient collection and transportation of urban and rural household waste. Built on the Beiben 6×4 heavy-duty chassis, this truck integrates garbage loading, compaction, transport, and unloading functions, and is widely used for waste collection in municipal sanitation, residential communities, industrial parks, and other locations.
North Benz V3 6x4 480hp EURO 3 Tractor Truck/Beiben Used Trucks For Sale,Beiben Used Trucks For Sale Mercedes Benz Technology High Quality Best After - Sales Servic SGS BV TUV
Beiben 10 roues camion tracteur 420hp tractor truck, best quality 10 routes beiben tracteur camions
Beiben ND3254B38,Traction type: 6X4 Driving type: LHD (RHD is optioned), Weichai brand,WP10.340E32 Inline six-cylinder, water-cooled, four-stroke, turbocharged inter-cooled Direct injection With the exhaust brake
North Benz truck head 380hp camion tracteur Beiben, supply the best quality of baotou beiben north benz truck 380 hp , 420 hp, 460 hp
Beiben 6×6 all-wheel-drive water tanker is a versatile specialized vehicle built on a Beiben 6×6 off-road chassis. It is equipped with a Weichai WP10.340E32 engine, paired with a FAST 9-speed manual transmission and hydraulic power steering system. With a gross vehicle weight of 26 tons, it is designed for working in complex terrains. Its core structure includes a 20-cubic-meter carbon steel water tank, an 80QZF-60/90N water pump, and a comprehensive spraying system featuring front, rear, and side sprinklers, a high-pressure water gun, and a DN500mm maintenance manhole, making it suitable for firefighting, dust suppression, greening, and other multi-scenario applications.
IPv6 network supported
English
français
русский
español
العربية
Subscribe